Two ways to read the same certified data. Switch any time; your choice is remembered on this device.
Airdach vs Proair: heat pump ratings compared
Against heat pumps of the same size and type, a typical Airdach model beats 40% and a typical Proair model 52%. Proair rates higher overall.
Covers heat pumps sold new today (R-454B and R-32 refrigerant). See older R-410A models · Updated
Airdach
40%
of similar heat pumps beaten by its typical model
Below average29 models listed
Proair
52%
of similar heat pumps beaten by its typical model
About average30 models listed
- Efficiency on a 5°F dayCOP at 5°FAirdach: Beats 48%Proair: Beats 49%
- Heating power kept at 5°FCapacity at 5°F vs 47°FAirdach: Beats 34%Proair: Beats 55%
- Winter-long heating efficiencyHSPF2Airdach: Beats 28%Proair: Beats 59%
- Summer-long cooling efficiencySEER2Airdach: Beats 29%Proair: Beats 55%
- Hot-day cooling efficiencyEER2Airdach: Beats 49%Proair: Beats 44%
Average (50%)Dashed outline: the other brand, for comparison
Want ranks, distributions per size class and cold-weather curves? Switch to Advanced
Rebate standards
CEE 2025
- Airdach
- 24%
- Proair
- 70%
Xcel CC
- Airdach
- 31%
- Proair
- 67%
CEE Advanced
- Airdach
- 0%
- Proair
- 0%
ENERGY STAR CC
- Airdach
- 0%
- Proair
- 0%
All-around best, ducted 2 tons
Balances heating (5°F output and efficiency, HSPF2) and cooling (SEER2, EER2), each rating against units their size.
Showing Ducted, 2 tons (21,000–26,999 Btu/h cooling). What size is my system?
Airdach
- 1A4TH24152MN1DLwith ducted air handler A4DH2400ME1DTAirdach2 tons · 23,200 Btu/h · DuctedNot a cold-climate pick: keeps 45% of its heat at 5°FMeets none of the standards tracked here
- Heat kept at 5°F
- 45% (Capacity at 5°F vs 47°F)
- Below the middle
- Efficiency at 5°F
- 1.94 (COP at 5°F)
- Below the middle
- Winter efficiency
- 7.8 (HSPF2)
- Below the middle
- Cooling efficiency
- 14.8 (SEER2)
- Below the middle
- Hot-day cooling
- 12.0 (EER2)
- Good
Proair
- 1PMUL-A4P-27HP-MProair2 tons · 26,600 Btu/h · DuctedCold-climate pick, score 48.6Meets CEE 2025, CEE 2026, Xcel CC
- Heat kept at 5°F
- 71% (Capacity at 5°F vs 47°F)
- Below the middle
- Efficiency at 5°F
- 2.00 (COP at 5°F)
- Good
- Winter efficiency
- 9.0 (HSPF2)
- Good
- Cooling efficiency
- 21.0 (SEER2)
- Top 10%
- Hot-day cooling
- 12.0 (EER2)
- Good
- 2P30-24CENHP-R454with ducted air handler PAC-24B18T-INTProair2 tons · 24,000 Btu/h · DuctedCold-climate pick, score 55.0Meets CEE 2025, CEE 2026, Xcel CC
- Heat kept at 5°F
- 84% (Capacity at 5°F vs 47°F)
- Good
- Efficiency at 5°F
- 1.80 (COP at 5°F)
- Below the middle
- Winter efficiency
- 9.5 (HSPF2)
- Good
- Cooling efficiency
- 16.0 (SEER2)
- Below the middle
- Hot-day cooling
- 10.0 (EER2)
- Below the middle
- 3P25-24CENHP-R454with indoor coil PAC-24B18T-INT and furnace S9V2B040U3VSProair2 tons · 24,000 Btu/h · DuctedCold-climate pick, score 45.0Meets CEE 2025, CEE 2026, Xcel CC
- Heat kept at 5°F
- 83% (Capacity at 5°F vs 47°F)
- Good
- Efficiency at 5°F
- 1.80 (COP at 5°F)
- Below the middle
- Winter efficiency
- 8.5 (HSPF2)
- Below the middle
- Cooling efficiency
- 17.2 (SEER2)
- Below the middle
- Hot-day cooling
- 10.5 (EER2)
- Below the middle
These are certified test ratings, not a recommendation for your home. The right size comes from a load calculation by a contractor.
Next steps
The advanced view adds ranks, both brands’ models inside every size class, standout models per rating and cold-weather curves.
Open the advanced view