Two ways to read the same certified data. Switch any time; your choice is remembered on this device.
AIRTEMP vs DIAMONDAIR: heat pump ratings compared
Against heat pumps of the same size and type, a typical AIRTEMP model beats 45% and a typical DIAMONDAIR model 42%. AIRTEMP rates slightly higher overall.
Covers older R-410A heat pumps, no longer installed new. See models sold today · Updated
AIRTEMP
45%
of similar heat pumps beaten by its typical model
About average25 models listed
DIAMONDAIR
42%
of similar heat pumps beaten by its typical model
Below average25 models listed
- Efficiency on a 5°F dayCOP at 5°FAIRTEMP: Beats 32%DIAMONDAIR: Beats 30%
- Heating power kept at 5°FCapacity at 5°F vs 47°FAIRTEMP: Beats 65%DIAMONDAIR: Beats 34%
- Winter-long heating efficiencyHSPF2AIRTEMP: Beats 37%DIAMONDAIR: Beats 42%
- Summer-long cooling efficiencySEER2AIRTEMP: Beats 38%DIAMONDAIR: Beats 38%
- Hot-day cooling efficiencyEER2AIRTEMP: Beats 44%DIAMONDAIR: Beats 53%
Average (50%)Dashed outline: the other brand, for comparison
Want ranks, distributions per size class and cold-weather curves? Switch to Advanced
Rebate standards
CEE 2025
- AIRTEMP
- 48%
- DIAMONDAIR
- 36%
Xcel CC
- AIRTEMP
- 52%
- DIAMONDAIR
- 24%
CEE Advanced
- AIRTEMP
- 0%
- DIAMONDAIR
- 0%
ENERGY STAR CC
- AIRTEMP
- 32%
- DIAMONDAIR
- 0%
Top cold-climate picks, ducted 2 tons
Only units that keep at least 70% of their heat at 5°F, ranked on heat kept, efficiency at 5°F and seasonal efficiency (HSPF2), against units their size.
Showing Ducted, 2 tons (21,000–26,999 Btu/h cooling). What size is my system?
AIRTEMP
- 1GXH24(7.0)FMK4DH-1AIRTEMP2 tons · 23,200 Btu/h · DuctedKeeps 96% of its heat at 5°FMeets CEE 2025, CEE 2026, Xcel CC
- Heat kept at 5°F
- 96% (Capacity at 5°F vs 47°F)
- Great
- Efficiency at 5°F
- 1.85 (COP at 5°F)
- Below the middle
- Seasonal efficiency
- 8.1 (HSPF2)
- Below the middle
DIAMONDAIR
None of DIAMONDAIR’s ducted, 2 tons models qualifies.
These are certified test ratings, not a recommendation for your home. The right size comes from a load calculation by a contractor.
Next steps
The advanced view adds ranks, both brands’ models inside every size class, standout models per rating and cold-weather curves.
Open the advanced view