Both views use the same certified data. This device remembers your choice.
MITS AIR vs Proair: heat pump ratings compared
Against heat pumps of the same size and type, a typical MITS AIR model beats 42% and a typical Proair model 56%. Proair rates higher overall.
Covers older R-410A heat pumps, no longer installed new. See models sold today · Updated
MITS AIR
42%
of similar heat pumps beaten by its typical model
Below average16 models listed
Proair
56%
of similar heat pumps beaten by its typical model
Above average16 models listed
- Efficiency on a 5°F dayCOP at 5°FMITS AIR: Beats 46%Proair: Beats 47%
- Heating power kept at 5°FCapacity at 5°F vs 47°FMITS AIR: Beats 51%Proair: Beats 72%
- Winter-long heating efficiencyHSPF2MITS AIR: Beats 68%Proair: Beats 78%
- Summer-long cooling efficiencySEER2MITS AIR: Beats 39%Proair: Beats 54%
- Hot-day cooling efficiencyEER2MITS AIR: Beats 20%Proair: Beats 40%
Average (50%)Dashed outline: the other brand, for comparison
Rebate standards
CEE 2025
- MITS AIR
- 31%
- Proair
- 63%
Xcel CC
- MITS AIR
- 50%
- Proair
- 75%
CEE Advanced
- MITS AIR
- 0%
- Proair
- 0%
ENERGY STAR CC
- MITS AIR
- 56%
- Proair
- 56%
Top cold-climate picks, ducted up to 1.5 tons
Showing Ducted, Up to 1.5 tons (under 21,000 Btu/h cooling). What size is my system?
MITS AIR
- 1MOX430U-18HFN1-Mwith ducted air handler MAC-24HWDN1-MN0MITS AIR1.5 tons · 18,000 Btu/h · DuctedKeeps 79% of its heat at 5°FMeets CEE 2025, CEE 2026, Xcel CC, ENERGY STAR CC
- Heat kept at 5°F
- 79% (Capacity at 5°F vs 47°F)
- Good
- Efficiency at 5°F
- 2.20 (COP at 5°F)
- Great
- Seasonal efficiency
- 9.5 (HSPF2)
- Good
Proair
No ducted, up to 1.5 tons model from Proair.
These are certified test ratings, not a recommendation for your home. The right size comes from a load calculation by a contractor.
Next steps
Advanced view: ranks, both brands’ models inside every size class, the standout model on each rating, cold-weather curves.
Open the advanced view