Both views use the same certified data. This device remembers your choice.
WILLIS vs WINDAIR: heat pump ratings compared
Against heat pumps of the same size and type, a typical WILLIS model beats 52% and a typical WINDAIR model 32%. WILLIS rates higher overall.
Covers older R-410A heat pumps, no longer installed new. See models sold today · Updated
WILLIS
52%
of similar heat pumps beaten by its typical model
About average15 models listed
WINDAIR
32%
of similar heat pumps beaten by its typical model
Well below average15 models listed
- Efficiency on a 5°F dayCOP at 5°FWILLIS: Beats 41%WINDAIR: Beats 16%
- Heating power kept at 5°FCapacity at 5°F vs 47°FWILLIS: Beats 66%WINDAIR: Beats 31%
- Winter-long heating efficiencyHSPF2WILLIS: Beats 52%WINDAIR: Beats 26%
- Summer-long cooling efficiencySEER2WILLIS: Beats 55%WINDAIR: Beats 34%
- Hot-day cooling efficiencyEER2WILLIS: Beats 46%WINDAIR: Beats 45%
Average (50%)Dashed outline: the other brand, for comparison
Rebate standards
CEE 2025
- WILLIS
- 87%
- WINDAIR
- 60%
Xcel CC
- WILLIS
- 87%
- WINDAIR
- 20%
CEE Advanced
- WILLIS
- 0%
- WINDAIR
- 0%
ENERGY STAR CC
- WILLIS
- 73%
- WINDAIR
- 0%
Top cold-climate picks, ducted up to 1.5 tons
Showing Ducted, Up to 1.5 tons (under 21,000 Btu/h cooling). What size is my system?
WILLIS
- 1MZUHW18KCH21S2-OWILLIS1.5 tons · 17,000 Btu/h · DuctedKeeps 78% of its heat at 5°FMeets CEE 2025, CEE 2026, Xcel CC
- Heat kept at 5°F
- 78% (Capacity at 5°F vs 47°F)
- Good
- Efficiency at 5°F
- 1.88 (COP at 5°F)
- Below the middle
- Seasonal efficiency
- 8.1 (HSPF2)
- Below the middle
WINDAIR
No ducted, up to 1.5 tons model from WINDAIR.
These are certified test ratings, not a recommendation for your home. The right size comes from a load calculation by a contractor.
Next steps
Advanced view: ranks, both brands’ models inside every size class, the standout model on each rating, cold-weather curves.
Open the advanced view