Both views use the same certified data. This device remembers your choice.
CanAir vs Nutech: heat pump ratings compared
Against heat pumps of the same size and type, a typical CanAir model beats 63% and a typical Nutech model 54%. CanAir rates higher overall.
Covers heat pumps sold new today (R-454B and R-32 refrigerant). See older R-410A models · Updated
CanAir
63%
of similar heat pumps beaten by its typical model
Well above average51 models listed
Nutech
54%
of similar heat pumps beaten by its typical model
About average50 models listed
- Efficiency on a 5°F dayCOP at 5°FCanAir: Beats 63%Nutech: Beats 57%
- Heating power kept at 5°FCapacity at 5°F vs 47°FCanAir: Beats 61%Nutech: Beats 45%
- Winter-long heating efficiencyHSPF2CanAir: Beats 73%Nutech: Beats 57%
- Summer-long cooling efficiencySEER2CanAir: Beats 63%Nutech: Beats 69%
- Hot-day cooling efficiencyEER2CanAir: Beats 57%Nutech: Beats 40%
Average (50%)Dashed outline: the other brand, for comparison
Rebate standards
CEE 2025
- CanAir
- 88%
- Nutech
- 70%
Xcel CC
- CanAir
- 92%
- Nutech
- 48%
CEE Advanced
- CanAir
- 2%
- Nutech
- 0%
ENERGY STAR CC
- CanAir
- 78%
- Nutech
- 0%
All-around best, ductless 5 tons and up
Showing Ductless, 5 tons and up (57,000 Btu/h and up cooling). What size is my system?
CanAir
No ductless, 5 tons and up model from CanAir.
Nutech
- 1N6OE30-60HFN10-M1D-DNutech5 tons · 60,000 Btu/h · DuctlessNot a cold-climate pick: keeps 63% of its heat at 5°FMeets CEE 2025
- Heat kept at 5°F
- 60% (Capacity at 5°F vs 47°F)
- Below the middle
- Efficiency at 5°F
- 2.00 (COP at 5°F)
- Below the middle
- Winter efficiency
- 9.6 (HSPF2)
- Good
- Cooling efficiency
- 19.2 (SEER2)
- Below the middle
- Hot-day cooling
- 10.0 (EER2)
- Below the middle
These are certified test ratings, not a recommendation for your home. The right size comes from a load calculation by a contractor.
Next steps
Advanced view: ranks, both brands’ models inside every size class, the standout model on each rating, cold-weather curves.
Open the advanced view