Both views use the same certified data. This device remembers your choice.
QuébecVair vs SHARP: heat pump ratings compared
Against heat pumps of the same size and type, a typical QuébecVair model beats 60% and a typical SHARP model 78%. SHARP rates higher overall.
Covers heat pumps sold new today (R-454B and R-32 refrigerant). See older R-410A models · Updated
QuébecVair
60%
of similar heat pumps beaten by its typical model
Well above average17 models listed
SHARP
78%
of similar heat pumps beaten by its typical model
Well above average17 models listed
- Efficiency on a 5°F dayCOP at 5°FQuébecVair: Beats 46%SHARP: Beats 81%
- Heating power kept at 5°FCapacity at 5°F vs 47°FQuébecVair: Beats 72%SHARP: Beats 75%
- Winter-long heating efficiencyHSPF2QuébecVair: Beats 50%SHARP: Beats 89%
- Summer-long cooling efficiencySEER2QuébecVair: Beats 63%SHARP: Beats 79%
- Hot-day cooling efficiencyEER2QuébecVair: Beats 65%SHARP: Beats 72%
Average (50%)Dashed outline: the other brand, for comparison
Rebate standards
CEE 2025
- QuébecVair
- 94%
- SHARP
- 100%
Xcel CC
- QuébecVair
- 100%
- SHARP
- 100%
CEE Advanced
- QuébecVair
- 12%
- SHARP
- 12%
ENERGY STAR CC
- QuébecVair
- 100%
- SHARP
- 94%
All-around best, ductless 3.5 to 4.5 tons
Showing Ductless, 3.5 to 4.5 tons (39,000 to 56,999 Btu/h cooling). What size is my system?
QuébecVair
- 1QVMZ42*R32QuébecVair3.5 tons · 42,000 Btu/h · DuctlessCold-climate pick, score 67.0Meets CEE 2025, CEE 2026, Xcel CC, ENERGY STAR CC
- Heat kept at 5°F
- 90% (Capacity at 5°F vs 47°F)
- Great
- Efficiency at 5°F
- 2.10 (COP at 5°F)
- Great
- Winter efficiency
- 10.0 (HSPF2)
- Below the middle
- Cooling efficiency
- 21.0 (SEER2)
- Below the middle
- Hot-day cooling
- 13.0 (EER2)
- Top 10%
SHARP
No ductless, 3.5 to 4.5 tons model from SHARP.
These are certified test ratings, not a recommendation for your home. The right size comes from a load calculation by a contractor.
Next steps
Advanced view: ranks, both brands’ models inside every size class, the standout model on each rating, cold-weather curves.
Open the advanced view