- Insights
- Rebate standards
- ENERGY STAR CC
Two ways to read the same certified data. Switch any time; your choice is remembered on this device.
ENERGY STAR CC: which heat pumps meet it?
Units listed by ENERGY STAR with the cold-climate designation (matched to AHRI references). 25% of certified models (2,434, about 3 in 10) meet it.
Covers older R-410A heat pumps, no longer installed new. See models sold today · Updated
What it asks for
A listing, not a set of numbers: the model must carry ENERGY STAR’s cold-climate designation.
A model counts when at least one of its certified pairings meets every line on its own. Programs can also have rules about the installer, sizing and paperwork; those are not checked here. Source: U.S. EPA
- Up to 1.5 tons1,090 of 3,130 models35%
- 2 tons438 of 1,437 models30%
- 2.5–3 tons477 of 2,588 models18%
- 3.5–4.5 tons410 of 2,136 models19%
- 5 tons and up19 of 349 models5%
All sizes: 25%
Source: AHRI directory.
Models that meet it, one size class at a time
Showing Ductless, 5 tons and up (57,000 Btu/h and up cooling). What size is my system?
- 1ARUB060GSS4LG5 tons · 60,000 Btu/h · DuctlessTop 10%2.45
- 2ARUB060GSS4LG5 tons · 60,000 Btu/h · DuctlessTop 10%2.45
- 3GMV-V60WL/C-T(U)Gree5 tons · 60,000 Btu/h · DuctlessGood2.10
- 4GMV-V60WL/C-T(U)Gree5 tons · 60,000 Btu/h · DuctlessGood2.10
- 5TVRF-V60WL/CGree (sold as Tosot)5 tons · 60,000 Btu/h · DuctlessGood2.10
- 6TVRF-V60WL/CGree (sold as Tosot)5 tons · 60,000 Btu/h · DuctlessGood2.10
- 7LMU601HVLG5 tons · 60,000 Btu/h · DuctlessBelow the middle2.01
- 8LMU601HVLG5 tons · 60,000 Btu/h · DuctlessBelow the middle2.01
- 9MXZ-SM60NAM2Mitsubishi Electric5 tons · 60,000 Btu/h · DuctlessBelow the middle2.00
- 10MXZ-SM60NAM2Mitsubishi Electric5 tons · 60,000 Btu/h · DuctlessBelow the middle2.00
20 ductless, 5 tons and up models meet it. See them all in the advanced list
These are certified test ratings, not a recommendation for your home. The right size comes from a load calculation by a contractor.
Next steps
Want the full criteria table, where each threshold falls on every model, pass rates by duct type and the complete list? Switch to Advanced.
Open the advanced view